2009 Ford Escape Oil Type

2009 Ford Escape Oil Type

ByPeter M. Thomas

The 2009 Ford Escape is a compact SUV that offers a combination of fuel efficiency, versatility, and off-road capability. It is available in both front-wheel drive and all-wheel drive configurations, and comes standard with a 2.5-liter four-cylinder engine. The Escape also offers a variety of optional features, including a turbocharged 2.0-liter four-cylinder engine, a six-speed automatic transmission, and a navigation system.

What Type of Oil Do I Need for My 2009 Ford Escape?

The type of oil you need for your 2009 Ford Escape depends on the engine type and the climate in which you live. For vehicles with the 2.5-liter four-cylinder engine, Ford recommends using 5W-20 oil. This oil is designed to provide optimum performance in all weather conditions, and it helps to protect the engine from wear and tear. For vehicles with the turbocharged 2.0-liter four-cylinder engine, Ford recommends using 5W-30 oil. This oil is also designed to provide optimum performance in all weather conditions, but it is specifically formulated for turbocharged engines.

How Often Should I Change My Oil?

Ford recommends changing the oil in your 2009 Escape every 5,000 miles or six months, whichever comes first. However, you may need to change your oil more frequently if you drive in severe conditions, such as dusty or muddy roads, or if you tow or haul heavy loads. It is also important to check the oil level in your Escape regularly and add oil as needed.

What Are the Benefits of Changing My Oil Regularly?

Changing your oil regularly has a number of benefits for your 2009 Ford Escape, including:

  • Protects the engine from wear and tear
  • Improves fuel efficiency
  • Reduces emissions
  • Extends the life of the engine

How to Change the Oil in Your 2009 Ford Escape

Changing the oil in your 2009 Ford Escape is a relatively simple task that can be completed in about 30 minutes. You will need the following tools and materials:

  • New oil filter (Motorcraft FL-910S)
  • New oil (5W-20 or 5W-30, depending on your engine type)
  • Oil drain pan
  • Funnel
  • Wrench
  • Rags

Once you have gathered your tools and materials, follow these steps to change the oil in your 2009 Ford Escape:

  1. Park your Escape on a level surface and turn off the engine.
  2. Crawl under the Escape and locate the oil drain plug. It is located on the bottom of the oil pan, near the front of the vehicle.
  3. Place the oil drain pan under the oil drain plug.
  4. Use the wrench to loosen the oil drain plug.
  5. Allow the oil to drain completely into the oil drain pan.
  6. Once all of the oil has drained, replace the oil drain plug and tighten it securely.
  7. Locate the oil filter. It is located near the top of the engine, on the passenger side.
  8. Use the wrench to loosen the oil filter.
  9. Remove the old oil filter and discard it.
  10. Apply a thin coat of new oil to the gasket of the new oil filter.
  11. Screw the new oil filter onto the engine until it is snug.
  12. Open the hood of your Escape and locate the oil fill cap. It is located on the top of the engine, near the front of the vehicle.
  13. Remove the oil fill cap.
  14. Use the funnel to pour the new oil into the engine.
  15. Add oil until the level reaches the “Full” mark on the dipstick.
  16. Replace the oil fill cap and tighten it securely.
  17. Start the engine and let it run for a few minutes.
  18. Turn off the engine and check the oil level again. It should be at the “Full” mark on the dipstick.

Conclusion

Changing the oil in your 2009 Ford Escape is a simple task that can be completed in about 30 minutes. By changing your oil regularly, you can protect your engine from wear and tear, improve fuel efficiency, reduce emissions, and extend the life of your engine.

Peter M. Thomas
Latest posts by Peter M. Thomas (see all)

Similar Posts