2012 Subaru Impreza Oil Type

2012 Subaru Impreza Oil Type

ByPeter M. Thomas

The 2012 Subaru Impreza is a compact car that offers excellent fuel economy and a comfortable ride. It is available in both sedan and hatchback body styles, and it comes standard with a 2.0-liter four-cylinder engine that produces 148 horsepower and 145 lb-ft of torque. The Impreza is also available with a 2.5-liter four-cylinder engine that produces 170 horsepower and 170 lb-ft of torque.

Engine Recommendations

The type of oil you use in your 2012 Subaru Impreza will depend on the engine that it is equipped with. The 2.0-liter engine requires 5W-30 oil, while the 2.5-liter engine requires 0W-20 oil. It is important to use the correct type of oil in your Impreza, as using the wrong type can damage the engine.

Checking the Oil

You should check the oil level in your 2012 Subaru Impreza every month or so. To do this, you will need to open the hood and locate the oil dipstick. The dipstick is usually located near the front of the engine. Pull the dipstick out and wipe it off with a clean rag. Then, reinsert the dipstick into the engine and pull it out again. The oil level should be between the “full” and “add” marks on the dipstick.

Changing the Oil

You should change the oil in your 2012 Subaru Impreza every 3,000 to 5,000 miles, or every six months, whichever comes first. To change the oil, you will need to purchase the correct type of oil filter and a new oil drain plug gasket. You will also need a wrench, a funnel, and a drain pan.

  1. Park your Impreza on a level surface and turn off the engine.
  2. Crawl under the car and locate the oil drain plug. It is usually located on the bottom of the oil pan.
  3. Place the drain pan under the oil drain plug.
  4. Use the wrench to loosen the oil drain plug.
  5. Allow the oil to drain out of the engine.
  6. Once all of the oil has drained out, replace the oil drain plug and tighten it securely.
  7. Locate the oil filter. It is usually located near the top of the engine.
  8. Use the wrench to loosen the oil filter.
  9. Remove the oil filter and discard it.
  10. Apply a thin coat of new oil to the gasket of the new oil filter.
  11. Screw the new oil filter onto the engine until it is snug.
  12. Add the correct amount of new oil to the engine.
  13. Check the oil level to make sure that it is between the “full” and “add” marks on the dipstick.

Conclusion

Changing the oil in your 2012 Subaru Impreza is a relatively easy task that can be completed in about 30 minutes. By following the steps outlined above, you can help to keep your Impreza running smoothly for many years to come.

Peter M. Thomas
Latest posts by Peter M. Thomas (see all)

Similar Posts