The 2016 Ford Focus is a compact car available in sedan, hatchback, and ST performance trim levels. It comes standard with a 2.0-liter four-cylinder engine that produces 160 horsepower and 146 lb-ft of torque. A six-speed manual transmission is standard, and a six-speed automatic transmission is available.
What Type of Oil Does a 2016 Ford Focus Take?
The type of oil that a 2016 Ford Focus takes depends on the engine size and trim level.
2.0L SE/SEL/Titanium
5W-20 full synthetic oil
2.0L ST
5W-50 full synthetic oil
How Much Oil Does a 2016 Ford Focus Take?
The amount of oil that a 2016 Ford Focus takes also depends on the engine size and trim level.
2.0L SE/SEL/Titanium
4.7 quarts with filter
4.5 quarts without filter
2.0L ST
6.0 quarts with filter
5.7 quarts without filter
When Should I Change the Oil in My 2016 Ford Focus?
The oil in your 2016 Ford Focus should be changed every 5,000 miles or six months, whichever comes first. This is the recommended interval for most vehicles, but you may need to change your oil more frequently if you drive in severe conditions, such as in dusty or sandy areas or if you tow heavy loads.
How to Change the Oil in Your 2016 Ford Focus
Changing the oil in your 2016 Ford Focus is a relatively simple task that you can do yourself with a few tools and materials.
Tools and Materials
* New oil filter (Motorcraft FL820S)
* New oil (see above for the correct type and amount)
* Oil drain pan
* Funnel
* Wrench
* Rags
Instructions
1. Park your Ford Focus on a level surface.
2. Turn off the engine and allow it to cool down.
3. Crawl under your car and locate the oil drain plug. It is usually located on the bottom of the oil pan.
4. Place the oil drain pan under the oil drain plug.
5. Use the wrench to loosen the oil drain plug.
6. Allow all of the oil to drain out of the oil pan.
7. Once all of the oil has drained out, replace the oil drain plug.
8. Locate the oil filter. It is usually located near the top of the engine.
9. Use the wrench to loosen the oil filter.
10. Remove the oil filter and discard it.
11. Apply a thin coat of new oil to the gasket of the new oil filter.
12. Screw the new oil filter onto the oil filter housing.
13. Tighten the oil filter until it is snug.
14. Add the new oil to the engine. Use the funnel to avoid spilling any oil.
15. Check the oil level with the dipstick. The oil level should be between the “Full” and “Add” marks on the dipstick.
16. Start the engine and let it run for a few minutes.
17. Check for any leaks.
18. Turn off the engine and allow it to cool down.
19. Check the oil level again. The oil level should still be between the “Full” and “Add” marks on the dipstick.
That’s it! You have now successfully changed the oil in your 2016 Ford Focus.
- Best Oil Options for Solid Fuel in Factorio - 8 January 2025
- The Best 5W40 Synthetic Oils for Your Vehicle - 8 January 2025
- Best 5W40 Full Synthetic Oil: Top Choices Reviewed - 5 January 2025