2017 Mazda 6 Oil Type

2017 Mazda 6 Oil Type

ByPeter M. Thomas

The 2017 Mazda 6 is a midsize car that offers a combination of performance, style, and fuel efficiency. To keep your Mazda 6 running smoothly, it’s important to use the correct type of oil. In this guide, we will provide you with all the information you need to know about the 2017 Mazda 6 oil type.

What Type of Oil Does the 2017 Mazda 6 Use?

The 2017 Mazda 6 uses 0W-20 full synthetic oil.

Why Use 0W-20 Full Synthetic Oil in My 2017 Mazda 6?

There are several reasons why you should use 0W-20 full synthetic oil in your 2017 Mazda 6:

  • Improved Fuel Economy: 0W-20 oil is thinner than traditional oil, which reduces friction and drag in the engine, resulting in improved fuel economy.
  • Reduced Emissions: 0W-20 oil also helps to reduce emissions by reducing the amount of unburned fuel that is released into the atmosphere.
  • Better Protection: 0W-20 oil provides better protection for your engine against wear and tear, even in extreme temperatures.
  • Extended Oil Change Intervals: 0W-20 oil can be used for longer periods of time between oil changes, saving you time and money.

How Often Should I Change My 2017 Mazda 6 Oil?

The oil change interval for the 2017 Mazda 6 is 7,500 miles or one year, whichever comes first. However, some factors can affect the oil change interval, such as:

  • Driving Conditions: If you frequently drive in stop-and-go traffic or in dusty or dirty conditions, you may need to change your oil more often.
  • Towing or Hauling: If you frequently tow or haul heavy loads, you may also need to change your oil more often.
  • Engine Modifications: If you have made modifications to your engine, you may need to use a different type of oil or change your oil more often.

How to Change the Oil in a 2017 Mazda 6

Changing the oil in a 2017 Mazda 6 is a relatively simple process that can be completed in about 30 minutes. Here are the steps involved:

  1. Gather your materials: You will need the following materials to change the oil in your 2017 Mazda 6:
    • 0W-20 full synthetic oil (5 quarts)
    • Oil filter (Mazda part number PE01-14-302)
    • Oil drain pan
    • Funnel
    • Wrench
    • Rags
  2. Prepare your car: Park your car on a level surface and turn off the engine.
  3. Locate the oil drain plug: The oil drain plug is located on the bottom of the oil pan. It is usually a 17mm bolt.
  4. Place the oil drain pan under the drain plug: Make sure the pan is large enough to catch all of the oil that will drain out.
  5. Loosen the oil drain plug: Use the wrench to loosen the oil drain plug. Be careful not to drop the bolt into the oil pan.
  6. Allow the oil to drain: Allow all of the oil to drain out of the oil pan. This may take a few minutes.
  7. Replace the oil drain plug: Once all of the oil has drained out, replace the oil drain plug. Tighten the plug until it is snug.
  8. Locate the oil filter: The oil filter is located near the top of the engine. It is usually a black or silver canister with a Mazda logo on it.
  9. Remove the oil filter: Use the wrench to loosen the oil filter. Be careful not to spill any oil.
  10. Apply a thin coat of new oil to the gasket of the new oil filter: This will help to ensure a good seal.
  11. Screw on the new oil filter: Hand-tighten the oil filter until it is snug. Do not overtighten the oil filter.
  12. Add new oil to the engine: Use the funnel to add new oil to the engine. Add 5 quarts of 0W-20 full synthetic oil.
  13. Check the oil level: Use the dipstick to check the oil level. The oil level should be between the “Full” and “Add” marks on the dipstick.
  14. Start the engine and let it run for a few minutes: This will circulate the new oil throughout the engine.
  15. Check for leaks: Look under the car for any leaks. If you see any leaks, tighten the oil drain plug or oil filter until the leak stops.

Conclusion

By following the steps outlined in this guide, you can easily change the oil in your 2017 Mazda 6. Using the correct type of oil and changing it at the recommended intervals will help to keep your Mazda 6 running smoothly for many years to come.

Peter M. Thomas
Latest posts by Peter M. Thomas (see all)

Similar Posts