2023 Bmw X1 Oil Capacity

2023 Bmw X1 Oil Capacity

ByPeter M. Thomas

The 2023 BMW X1 is a compact luxury SUV that offers a variety of engine options. Depending on the engine, the oil capacity can vary. In this blog post, we will discuss the oil capacity for each engine option available in the 2023 BMW X1.

Engine Options and Oil Capacities

  • 2.0L Turbocharged 4-Cylinder Engine: This engine is found in the X1 sDrive28i and X1 xDrive28i models. It has an oil capacity of 5.7 quarts (5.4 liters).
  • 3.0L Turbocharged 6-Cylinder Engine: This engine is found in the X1 xDrive30i model. It has an oil capacity of 6.9 quarts (6.5 liters).
  • 2.0L Turbocharged 4-Cylinder Plug-In Hybrid Engine: This engine is found in the X1 xDrive25e model. It has an oil capacity of 5.7 quarts (5.4 liters).

Checking the Oil Level

  1. Park the vehicle on a level surface.
  2. Turn off the engine and allow it to cool down.
  3. Open the hood and locate the oil dipstick. It is usually located near the front of the engine, towards the back of the engine bay.
  4. Pull out the dipstick and wipe it clean with a rag.
  5. Reinsert the dipstick into the tube and push it all the way down.
  6. Pull out the dipstick again and check the oil level. The oil level should be between the “Full” and “Add” marks on the dipstick.
  7. If the oil level is low, add oil to the engine until the level reaches the “Full” mark.

Changing the Oil

  1. Gather the following materials:
    • New oil filter (check your owner’s manual for the correct size)
    • New oil (check your owner’s manual for the correct type and amount)
    • Oil drain pan
    • Funnel
    • Wrench
    • Rags
    • Gloves
    • Safety glasses
  2. Park the vehicle on a level surface.
  3. Turn off the engine and allow it to cool down.
  4. Crawl under the vehicle and locate the oil drain plug. It is usually located on the bottom of the oil pan.
  5. Place the oil drain pan under the oil drain plug.
  6. Use the wrench to loosen the oil drain plug.
  7. Allow the oil to drain completely into the oil drain pan.
  8. Once the oil has drained, replace the oil drain plug.
  9. Locate the oil filter. It is usually located near the top of the engine.
  10. Use the wrench to loosen the oil filter.
  11. Remove the old oil filter and discard it.
  12. Apply a thin coat of new oil to the gasket of the new oil filter.
  13. Screw on the new oil filter until it is snug.
  14. Add new oil to the engine through the oil filler cap.
  15. Check the oil level using the dipstick.
  16. Start the engine and let it run for a few minutes.
  17. Turn off the engine and check the oil level again.
  18. If the oil level is correct, you are finished.

Conclusion

The oil capacity for the 2023 BMW X1 varies depending on the engine option. It is important to check the oil level regularly and change the oil and oil filter according to the manufacturer’s recommendations. By following these simple steps, you can help keep your BMW X1 running smoothly for many years to come.

Peter M. Thomas
Latest posts by Peter M. Thomas (see all)

Similar Posts