2007 Honda

What Type of Oil Does a 2007 Honda Fit Take?

ByPeter M. Thomas

The 2007 Honda Fit requires 0W-20 synthetic oil. This oil is specifically designed for fuel-efficient vehicles and helps to improve gas mileage and reduce emissions. It is also important to use the correct oil filter for your vehicle. The recommended oil filter for the 2007 Honda Fit is the Honda 15400-PLM-A02 oil filter.

Why Use 0W-20 Oil in a 2007 Honda Fit?

0W-20 oil is a low-viscosity oil that flows easily at low temperatures. This makes it ideal for use in cold climates, as it can help to reduce engine wear during startup. 0W-20 oil also helps to improve fuel economy and reduce emissions.

How Often Should I Change the Oil in My 2007 Honda Fit?

The oil in your 2007 Honda Fit should be changed every 7,500 miles or once a year, whichever comes first. If you drive your vehicle in severe conditions, such as in dusty or muddy areas, you may need to change the oil more frequently.

What Happens if I Don’t Change the Oil in My 2007 Honda Fit?

If you do not change the oil in your 2007 Honda Fit, it can cause a number of problems, including:

– Increased engine wear
– Reduced fuel economy
– Increased emissions
– Engine damage

How to Change the Oil in a 2007 Honda Fit

Changing the oil in a 2007 Honda Fit is a relatively simple process that can be completed in about 30 minutes. Here are the steps involved:

1. Gather the following materials:
– 4 quarts of 0W-20 synthetic oil
– New Honda 15400-PLM-A02 oil filter
– Oil drain pan
– Funnel
– Wrench
– Rags

2. Park your vehicle on a level surface and turn off the engine.
3. Crawl under the vehicle and locate the oil drain plug. The oil drain plug is usually located on the bottom of the oil pan.
4. Place the oil drain pan under the oil drain plug.
5. Loosen the oil drain plug with a wrench.
6. Allow all of the oil to drain out of the oil pan.
7. Replace the oil drain plug.
8. Locate the oil filter. The oil filter is usually located near the top of the engine.
9. Loosen the oil filter with a wrench.
10. Remove the old oil filter and discard it.
11. Apply a thin coat of new oil to the gasket of the new oil filter.
12. Screw the new oil filter onto the engine.
13. Add 4 quarts of 0W-20 synthetic oil to the engine.
14. Check the oil level using the dipstick. The oil level should be between the “Full” and “Add” marks on the dipstick.
15. Start the engine and let it run for a few minutes.
16. Check for leaks.

Conclusion

Changing the oil in a 2007 Honda Fit is a relatively simple process that can be completed in about 30 minutes. By following the steps outlined in this guide, you can ensure that your vehicle is properly lubricated and protected.

Peter M. Thomas
Latest posts by Peter M. Thomas (see all)

Similar Posts