2017 Jeep Renegade 2 4 Oil Type

2017 Jeep Renegade 2 4 Oil Type

ByPeter M. Thomas

The 2017 Jeep Renegade 2.4L engine requires oil with a viscosity of 0W-20 or 5W-20. The 0W-20 oil is recommended for all temperatures, while the 5W-20 oil is recommended for temperatures above 0 degrees Fahrenheit.

Capacity

The 2017 Jeep Renegade 2.4L engine has an oil capacity of 5.5 quarts with filter. When changing the oil, it is important to add the correct amount of oil to ensure proper lubrication of the engine.

Brand Recommendations

There are many different brands of oil available, so it is important to choose one that is reputable and meets the specifications of the 2017 Jeep Renegade 2.4L engine. Some good brands of oil include:

  • Mobil 1
  • Castrol
  • Valvoline
  • Pennzoil
  • Amsoil

How to Change the Oil

Changing the oil in the 2017 Jeep Renegade 2.4L engine is a relatively simple task that can be completed in about 30 minutes. The following steps will guide you through the process:

  1. Park the vehicle on a level surface.
  2. Turn off the engine and allow it to cool down.
  3. Open the hood and locate the oil drain plug. The oil drain plug is typically located on the bottom of the oil pan.
  4. Place an oil pan under the oil drain plug.
  5. Use a wrench to loosen the oil drain plug.
  6. Allow the oil to drain completely into the oil pan.
  7. Replace the oil drain plug and tighten it securely.
  8. Locate the oil filter. The oil filter is typically located near the top of the engine.
  9. Use an oil filter wrench to loosen the oil filter.
  10. Remove the old oil filter and discard it.
  11. Apply a thin coat of new oil to the gasket of the new oil filter.
  12. Screw on the new oil filter until it is snug.
  13. Add the correct amount of new oil to the engine.
  14. Check the oil level with the dipstick.
  15. Start the engine and let it run for a few minutes.
  16. Turn off the engine and check for leaks.

Conclusion

Changing the oil in the 2017 Jeep Renegade 2.4L engine is a simple task that can be completed in about 30 minutes. By following the steps outlined in this blog post, you can ensure that your engine is properly lubricated and running at its best.

Peter M. Thomas
Latest posts by Peter M. Thomas (see all)

Similar Posts