Ford Expedition Oil

Ford Expedition Oil

ByPeter M. Thomas

The Ford Expedition is a full-size SUV that has been in production since 1997. It is a popular choice for families and those who need a vehicle with plenty of cargo and passenger space. Like all vehicles, the Ford Expedition requires regular oil changes to keep it running smoothly.

What Type of Oil Does the Ford Expedition Take?

The type of oil that your Ford Expedition takes depends on the year and model of your vehicle. For most Ford Expeditions, the recommended oil is 5W-20 full synthetic oil. However, some older models may require 5W-30 conventional oil.

You can find the recommended oil type for your Ford Expedition in your owner’s manual. If you are unsure of what type of oil to use, you can also contact your local Ford dealership.

How Often Should I Change the Oil in My Ford Expedition?

The frequency of oil changes for your Ford Expedition will depend on your driving habits and the type of oil that you are using. If you are using conventional oil, you should change the oil every 3,000 miles or 3 months. If you are using synthetic oil, you can extend the oil change interval to 5,000 miles or 6 months.

If you drive in severe conditions, such as stop-and-go traffic or dusty roads, you may need to change the oil more often.

How to Change the Oil in Your Ford Expedition

Changing the oil in your Ford Expedition is a relatively simple task that can be done at home with a few basic tools and materials. Here are the steps involved:

  1. Gather your materials.
    • New oil filter
    • New oil (check your owner’s manual for the correct type and amount)
    • Oil drain pan
    • Funnel
    • Wrench
    • Rags
  2. Prepare your vehicle.
    • Park your vehicle on a level surface.
    • Turn off the engine and allow it to cool down.
    • Raise the vehicle using a jack and jack stands.
  3. Locate the oil drain plug.
    • The oil drain plug is typically located on the bottom of the oil pan.
    • It is usually a 17mm bolt.
  4. Place the oil drain pan under the oil drain plug.
  5. Use the wrench to loosen the oil drain plug.
  6. Allow the oil to drain completely.
  7. Replace the oil drain plug.
  8. Locate the oil filter.
    • The oil filter is typically located near the top of the engine.
    • It is usually a cylindrical-shaped object with a black cap.
  9. Use the wrench to loosen the oil filter.
  10. Remove the old oil filter and discard it.
  11. Apply a thin coat of new oil to the gasket of the new oil filter.
  12. Screw on the new oil filter until it is snug.
  13. Add new oil to the engine.
    • Use the funnel to add new oil to the engine.
    • Add the amount of oil specified in your owner’s manual.
  14. Check the oil level.
    • Use the dipstick to check the oil level.
    • The oil level should be between the “full” and “add” marks on the dipstick.
  15. Lower the vehicle.
  16. Start the engine and let it run for a few minutes.
  17. Check for leaks.
    • Look under the vehicle for any leaks.
    • If you see any leaks, tighten the oil drain plug or oil filter until the leak stops.

Conclusion

Changing the oil in your Ford Expedition is a relatively simple task that can be done at home with a few basic tools and materials. By following the steps outlined above, you can help keep your vehicle running smoothly for many years to come.

Peter M. Thomas
Latest posts by Peter M. Thomas (see all)

Similar Posts