Bmw X4 Oil Type And Oil Guide

by

The BMW X4 is a popular luxury SUV known for its sporty handling and stylish design. To keep your X4 running smoothly, it’s essential to use the correct oil and change it according to the manufacturer’s recommendations.

What Kind of Oil Does a BMW X4 Take?

The type of oil your BMW X4 needs depends on the model year and engine variant. Generally, BMW recommends using synthetic motor oil that meets the following specifications:

  • SAE 0W-20 or 5W-30 (for most models)
  • ACEA C3 or BMW Longlife-01 (for diesel engines)
  • BMW Longlife-04 (for gasoline engines)

How Often Should You Change the Oil in a BMW X4?

BMW recommends changing the oil in your X4 every 12,000 miles or 1 year, whichever comes first. However, you may need to change the oil more frequently if you drive in severe conditions, such as:

  • Frequent short trips
  • Stop-and-go traffic
  • Dusty or dirty roads
  • Extreme temperatures

What are the Signs of Bad Oil in a BMW X4?

There are several signs that may indicate that the oil in your BMW X4 needs to be changed, including:

  • Dark or dirty oil
  • Low oil level
  • Oil leaks
  • Knocking or ticking sounds from the engine
  • Reduced engine performance
  • Increased fuel consumption

How to Change the Oil in a BMW X4

Changing the oil in a BMW X4 is a relatively simple process, but it’s important to follow the correct steps to ensure that it’s done correctly. Here’s a step-by-step guide:

  1. Park your X4 on a level surface and turn off the engine.
  2. Open the hood and locate the oil drain plug. It’s usually located on the bottom of the engine oil pan.
  3. Place an oil pan under the drain plug to catch the old oil.
  4. Loosen the drain plug using a wrench.
  5. Allow all the old oil to drain out.
  6. Replace the drain plug and tighten it securely.
  7. Locate the oil filter. It’s usually located near the top of the engine.
  8. Remove the old oil filter using an oil filter wrench.
  9. Apply a thin coat of new oil to the gasket of the new oil filter.
  10. Screw on the new oil filter until it’s snug.
  11. Fill the engine with the recommended amount of new oil.
  12. Check the oil level using the dipstick.
  13. Start the engine and let it run for a few minutes.
  14. Check for any leaks.

Conclusion

By following the steps outlined in this guide, you can ensure that your BMW X4 has the proper oil and that it’s changed according to the manufacturer’s recommendations. This will help keep your X4 running smoothly and extend its lifespan.

Peter M. Thomas
Latest posts by Peter M. Thomas (see all)

Content Section

→ Section