Buick Enclave Transmission Fluid Capacity

Buick Enclave Transmission Fluid Capacity

ByPeter M. Thomas

The Buick Enclave is a popular crossover SUV that has been in production since 2007. It is known for its spacious interior, comfortable ride, and powerful engine. Like all vehicles, the Buick Enclave requires regular maintenance, including transmission fluid changes. In this blog post, we will discuss the transmission fluid capacity of the Buick Enclave and provide instructions on how to check and change the fluid.

Transmission Fluid Capacity

The transmission fluid capacity of the Buick Enclave varies depending on the model year and engine size. However, most models have a transmission fluid capacity of around 6 to 8 quarts.

  • 2007-2017 Buick Enclave with 3.6L V6 Engine: 6.5 quarts
  • 2018-Present Buick Enclave with 3.6L V6 Engine: 7.5 quarts
  • 2019-Present Buick Enclave Avenir with 3.6L V6 Engine: 8.0 quarts

How to Check Transmission Fluid

Checking the transmission fluid level is a relatively simple process. You will need a dipstick and a clean rag.

  1. Park your Buick Enclave on a level surface.
  2. Turn off the engine and allow it to cool down.
  3. Open the hood of your vehicle.
  4. Locate the transmission fluid dipstick. It is usually located near the back of the engine compartment, towards the passenger side.
  5. Pull the dipstick out and wipe it clean with a rag.
  6. Reinsert the dipstick into the transmission fluid tube until it is fully seated.
  7. Pull the dipstick out again and check the fluid level.

The transmission fluid level should be between the “Full” and “Add” marks on the dipstick.

How to Change Transmission Fluid

Changing the transmission fluid is a more involved process than checking the fluid level. You will need a new transmission filter, a new transmission fluid gasket, and a few quarts of new transmission fluid.

  1. Park your Buick Enclave on a level surface.
  2. Turn off the engine and allow it to cool down.
  3. Raise the vehicle up on jack stands.
  4. Locate the transmission fluid pan. It is usually located at the bottom of the transmission housing.
  5. Place a drain pan under the transmission fluid pan.
  6. Remove the transmission fluid pan bolts and allow the fluid to drain out.
  7. Once the fluid has drained out, replace the transmission fluid filter.
  8. Replace the transmission fluid pan gasket.
  9. Reinstall the transmission fluid pan bolts.
  10. Add new transmission fluid to the transmission until the fluid level is between the “Full” and “Add” marks on the dipstick.

Conclusion

Changing the transmission fluid in your Buick Enclave is a relatively simple process that can be completed in about an hour. By following the steps outlined in this blog post, you can ensure that your Buick Enclave’s transmission is properly lubricated and operating at peak performance.

Peter M. Thomas
Latest posts by Peter M. Thomas (see all)

Similar Posts