Chevrolet Malibu Engine Oil Capacity Usa

Chevrolet Malibu Engine Oil Capacity USA

ByPeter M. Thomas

The Chevrolet Malibu is a mid-size car that has been in production since 1997. It is currently in its ninth generation. The Malibu is available with a variety of engine options, including four-cylinder and six-cylinder engines. The oil capacity of the Malibu varies depending on the engine type.

Engine Oil Capacity by Engine Type

The following table shows the oil capacity for each engine type available in the Chevrolet Malibu:

| Engine Type | Oil Capacity |
|—|—|
| 1.5L Turbocharged Inline-4 | 4.4 quarts (with filter) |
| 2.0L Turbocharged Inline-4 | 5.3 quarts (with filter) |
| 2.5L Naturally Aspirated Inline-4 | 5.3 quarts (with filter) |
| 3.0L V6 | 6.0 quarts (with filter) |

How to Change the Oil in a Chevrolet Malibu

Changing the oil in a Chevrolet Malibu is a relatively simple task that can be completed in about 30 minutes. The following steps will guide you through the process:

1. Gather the necessary materials. You will need:
* New oil filter (check your owner’s manual for the correct filter type)
* New oil (check your owner’s manual for the correct oil type and capacity)
* Funnel
* Wrench
* Oil pan
* Rags
2. Prepare the vehicle. Turn off the engine and allow it to cool down. Raise the hood and locate the oil drain plug. The oil drain plug is typically located on the bottom of the oil pan.
3. Drain the oil. Place the oil pan under the oil drain plug. Use the wrench to loosen the oil drain plug and allow all of the oil to drain out.
4. Replace the oil filter. Once all of the oil has drained out, remove the old oil filter. Apply a thin coat of new oil to the gasket of the new oil filter. Install the new oil filter hand-tight.
5. Refill the engine with oil. Use the funnel to pour the new oil into the engine. Add the amount of oil specified in your owner’s manual.
6. Start the engine and check the oil level. Start the engine and let it run for a few minutes. Turn off the engine and wait a few minutes for the oil to settle. Use the dipstick to check the oil level. The oil level should be between the “add” and “remove” marks on the dipstick.

Tips for Changing the Oil in a Chevrolet Malibu

  • Be sure to use the correct type of oil for your vehicle. The correct oil type will be listed in your owner’s manual.
  • Change the oil filter every time you change the oil.</
  • Dispose of the old oil and oil filter properly.</
  • Keep a record of when you change the oil in your vehicle.</

Conclusion

Changing the oil in a Chevrolet Malibu is a simple task that can be completed in about 30 minutes. By following the steps in this guide, you can easily change the oil in your Malibu and keep it running smoothly.

Peter M. Thomas
Latest posts by Peter M. Thomas (see all)

Similar Posts