Chevrolet Spark Transmission Fluid Capacity

by

The transmission fluid capacity for a Chevrolet Spark can vary depending on the model year and transmission type. Here are some general guidelines:

  • Manual Transmission: Approximately 2 quarts (1.9 liters)
  • Automatic Transmission (CVT): Approximately 4.2 quarts (4 liters) for a drain and refill.

For the most accurate information, always refer to the owner’s manual or consult a professional.

The Chevrolet Spark is a subcompact car that has been in production since 2009. It is known for its fuel efficiency and affordability, making it a popular choice for city drivers. The Spark is equipped with a continuously variable transmission (CVT), which is a type of automatic transmission that uses a belt or chain to transfer power from the engine to the wheels. CVT transmissions are known for their smooth shifting and fuel efficiency, but they require special maintenance, including regular transmission fluid changes.

Why Is Transmission Fluid Important?

Transmission fluid is a vital part of your Chevrolet Spark’s CVT. It lubricates the moving parts of the transmission, helps to cool the transmission, and prevents wear and tear. Without proper transmission fluid, your Spark’s transmission could overheat and fail, leading to costly repairs.

When Should You Change Your Transmission Fluid?

The recommended interval for changing your Chevrolet Spark’s transmission fluid is every 30,000 miles or 24 months, whichever comes first. However, you may need to change your transmission fluid more often if you drive in stop-and-go traffic or in extreme weather conditions.

What Type of Transmission Fluid Should You Use?

It is important to use the correct type of transmission fluid in your Chevrolet Spark. The wrong type of fluid can damage your transmission. The recommended transmission fluid for the Spark is Dexron VI ATF. You can find Dexron VI ATF at most auto parts stores.

How to Change Your Transmission Fluid

Changing your Chevrolet Spark’s transmission fluid is a relatively simple task that can be done at home with the right tools and materials. Here are the steps involved:

1. Gather the necessary tools and materials.

  • New transmission fluid (Dexron VI ATF)
  • Transmission fluid drain pan
  • Funnel
  • Wrench
  • Rags

2. Prepare your vehicle.

  • Park your vehicle on a level surface.
  • Turn off the engine and allow it to cool down.
  • Engage the parking brake.

3. Locate the transmission fluid drain plug.

  • The transmission fluid drain plug is usually located on the bottom of the transmission pan.
  • It is typically a 17mm bolt.

4. Place the transmission fluid drain pan under the drain plug.

  • Make sure the drain pan is large enough to catch all of the fluid that will drain out.

5. Loosen the drain plug.

  • Use the wrench to loosen the drain plug.
  • Be careful not to drop the bolt into the drain pan.

6. Allow the transmission fluid to drain.

  • Allow all of the fluid to drain out of the transmission.
  • This may take a few minutes.

7. Replace the drain plug.

  • Once all of the fluid has drained out, replace the drain plug.
  • Tighten the drain plug until it is snug.

8. Add new transmission fluid.

  • Use the funnel to add new transmission fluid to the transmission.
  • Add enough fluid to bring the level up to the “Full” mark on the dipstick.

9. Check the transmission fluid level.

  • Start the engine and let it run for a few minutes.
  • Check the transmission fluid level again. The level should be between the “Full” and “Add” marks on the dipstick.

Conclusion

Changing your Chevrolet Spark’s transmission fluid is an important part of maintaining your vehicle. By following the steps outlined in this guide, you can help keep your Spark’s transmission running smoothly and extend its lifespan.

Peter M. Thomas
Latest posts by Peter M. Thomas (see all)

Content Section

→ Section