Chrysler Voyager Transmission Fluid

Chrysler Voyager Transmission Fluid Capacity

ByPeter M. Thomas

The transmission fluid in your Chrysler Voyager is responsible for lubricating and cooling the moving parts of the transmission. It also helps to prevent wear and tear and extend the life of the transmission. Changing the transmission fluid is a relatively simple and inexpensive maintenance procedure that can help to keep your Voyager running smoothly.

Chrysler Voyager Fluid Capacity by Variations

  • 2020 Chrysler Voyager (3.6L 6-cylinder engine):

    • 9-speed 948TE transmission: Total fill – 4.8 quarts

  • Chrysler Grand Voyager RT 2.8 CRD Diesel (depending on year):

    • 62TE transmission: Typical capacity ranges from 8 to 10 liters (approximately 8.5 to 10.5 quarts)

Important Tips:

  • Always use the recommended transmission fluid type: Refer to your owner’s manual or consult a trusted mechanic. Using the wrong fluid can harm your transmission.
  • Capacity may vary depending on service: The total fill capacity might differ from the amount needed for a routine fluid drain and refill.

If you’re unsure about the exact capacity or have difficulty finding the information, it’s always best to consult a qualified mechanic or service center. They can look up the specifics for your vehicle and ensure you use the correct fluid and amount.

When to Change the Transmission Fluid in Your Chrysler Voyager

The transmission fluid in your Chrysler Voyager should be changed every 30,000 miles or 24 months, whichever comes first. However, if you drive your Voyager in severe conditions, such as stop-and-go traffic or towing a trailer, you may need to change the transmission fluid more often.

What Type of Transmission Fluid to Use in Your Chrysler Voyager

The type of transmission fluid that you use in your Chrysler Voyager is important. The wrong type of fluid can damage the transmission. The owner’s manual for your Voyager will specify the type of transmission fluid that you should use.

How to Change the Transmission Fluid in Your Chrysler Voyager

Changing the transmission fluid in your Chrysler Voyager is a relatively simple process. However, it is important to follow the steps carefully to avoid damaging the transmission.

  1. Gather the necessary tools and materials. You will need a new transmission fluid filter, a new transmission fluid pan gasket, a funnel, a wrench, and a drain pan.
  2. Locate the transmission fluid drain plug. The drain plug is usually located on the bottom of the transmission pan.
  3. Place the drain pan under the transmission fluid drain plug.
  4. Loosen the transmission fluid drain plug with the wrench.
  5. Allow the transmission fluid to drain completely.
  6. Replace the transmission fluid drain plug.
  7. Remove the transmission fluid pan.
  8. Replace the transmission fluid filter.
  9. Replace the transmission fluid pan gasket.
  10. Reinstall the transmission fluid pan.
  11. Add new transmission fluid to the transmission.
  12. Check the transmission fluid level.

Benefits of Changing the Transmission Fluid in Your Chrysler Voyager

Changing the transmission fluid in your Chrysler Voyager can provide a number of benefits, including:

  • Improved transmission performance
  • Reduced wear and tear on the transmission
  • Extended transmission life
  • Improved fuel economy
  • Smoother shifting

Conclusion

Changing the transmission fluid in your Chrysler Voyager is a relatively simple and inexpensive maintenance procedure that can help to keep your Voyager running smoothly. By following the steps in this guide, you can easily change the transmission fluid in your Voyager and enjoy the benefits of a well-maintained transmission.

Peter M. Thomas
Latest posts by Peter M. Thomas (see all)

Similar Posts