Dodge Avenger Transmission Fluid Capacity

Dodge Avenger Transmission Fluid Capacity

ByPeter M. Thomas

The Dodge Avenger is a mid-size sedan that was produced by Dodge from 2007 to 2014. It was available with a variety of engine and transmission options, including a 2.4-liter four-cylinder engine with a four-speed automatic transmission, a 3.5-liter V6 engine with a six-speed automatic transmission, and a 3.6-liter V6 engine with a six-speed automatic transmission.

2.4-liter Four-Cylinder Engine

The 2.4-liter four-cylinder engine in the Dodge Avenger has a transmission fluid capacity of 3.8 quarts (3.6 liters).

3.5-liter V6 Engine

The 3.5-liter V6 engine in the Dodge Avenger has a transmission fluid capacity of 4.8 quarts (4.5 liters).

3.6-liter V6 Engine

The 3.6-liter V6 engine in the Dodge Avenger has a transmission fluid capacity of 5.1 quarts (4.8 liters).

Transmission Fluid Change Intervals

The transmission fluid in the Dodge Avenger should be changed every 30,000 miles or 24 months, whichever comes first. However, if you drive in severe conditions, such as stop-and-go traffic or towing heavy loads, you may need to change the transmission fluid more often.

How to Change the Transmission Fluid

To change the transmission fluid in the Dodge Avenger, you will need the following tools and materials:

  • New transmission fluid (see above for capacities)
  • Transmission fluid drain pan
  • Funnel
  • Wrench
  • Rags
  1. Park the Avenger on a level surface.
  2. Turn off the engine and allow it to cool down.
  3. Crawl under the Avenger and locate the transmission fluid drain plug. It is typically located on the bottom of the transmission pan.
  4. Place the transmission fluid drain pan under the drain plug.
  5. Loosen the drain plug with the wrench.
  6. Allow the transmission fluid to drain completely.
  7. Replace the drain plug and tighten it securely.
  8. Locate the transmission fluid fill plug. It is typically located on the top of the transmission pan.
  9. Remove the fill plug.
  10. Insert the funnel into the fill hole.
  11. Add new transmission fluid to the Avenger until it reaches the full mark on the dipstick.
  12. Replace the fill plug and tighten it securely.

Conclusion

Changing the transmission fluid in the Dodge Avenger is a relatively simple task that can be completed in about 30 minutes. By following the steps outlined above, you can help keep your Avenger’s transmission running smoothly for many years to come.

Peter M. Thomas
Latest posts by Peter M. Thomas (see all)

Similar Posts