Dodge Viper Transmission Fluid

Dodge Viper Transmission Fluid Capacity

by

The Dodge Viper is a high-performance sports car that has been in production since 1991. It is known for its powerful V10 engine and its aggressive styling. The Viper’s transmission is also a key component of its performance, and it requires special fluid to keep it operating properly.

The transmission fluid capacity for a Dodge Viper depends on the model year and transmission type. Here are some general guidelines:

  • 1992-2002 Dodge Viper (T-56 6-speed manual transmission): Approximately 4 quarts (3.8 liters) of Dexron III/Mercon automatic transmission fluid
  • 2003-2010 Dodge Viper (T-56/TR-6060 6-speed manual transmission): Approximately 4 quarts (3.8 liters) of Dexron III/Mercon automatic transmission fluid
  • 2013-2017 Dodge Viper (TR-6060 6-speed manual transmission): Approximately 4 quarts (3.8 liters) of Dexron III/Mercon automatic transmission fluid.

Types of Transmission Fluid

There are two main types of transmission fluid that can be used in a Dodge Viper:

  • Manual transmission fluid: This type of fluid is used in manual transmission Vipers. It helps to lubricate the gears and bearings in the transmission, and it also helps to prevent wear and tear.
  • Automatic transmission fluid: This type of fluid is used in automatic transmission Vipers. It helps to lubricate the gears and bearings in the transmission, and it also helps to shift gears smoothly.

Choosing the Right Transmission Fluid

When choosing a transmission fluid for your Dodge Viper, it is important to consider the following factors:

  • The type of transmission in your Viper: If you have a manual transmission Viper, you will need to use manual transmission fluid. If you have an automatic transmission Viper, you will need to use automatic transmission fluid.
  • The climate in which you live: If you live in a cold climate, you will need to use a transmission fluid that is designed for cold weather. If you live in a hot climate, you will need to use a transmission fluid that is designed for hot weather.
  • The age and mileage of your Viper: As your Viper gets older and accumulates more mileage, it will need a different type of transmission fluid. It is important to consult your owner’s manual to determine the correct type of transmission fluid for your Viper.

How to Change Transmission Fluid

Changing the transmission fluid in your Dodge Viper is a relatively simple process. However, it is important to follow the steps carefully to avoid damaging your Viper.

Here are the steps on how to change transmission fluid in a Dodge Viper:

  1. Park your Viper on a level surface and turn off the engine.
  2. Crawl under your Viper and locate the transmission fluid pan. It is typically located at the bottom of the transmission.
  3. Place a drain pan under the transmission fluid pan.
  4. Loosen the drain plug on the transmission fluid pan.
  5. Allow the transmission fluid to drain out of the pan.
  6. Once all of the transmission fluid has drained out, tighten the drain plug.
  7. Remove the transmission fluid filter, if equipped.
  8. Install a new transmission fluid filter, if equipped.
  9. Add new transmission fluid to the transmission. The amount of fluid you need to add will vary depending on the type of transmission in your Viper. Consult your owner’s manual for the correct amount of fluid.
  10. Check the transmission fluid level. The fluid level should be between the “full” and “add” marks on the dipstick.

Conclusion

Changing the transmission fluid in your Dodge Viper is a simple process that can be performed at home with a few basic tools. By following the steps in this guide, you can keep your Viper’s transmission operating properly for many years to come.

Peter M. Thomas
Latest posts by Peter M. Thomas (see all)

Content Section

→ Section