Ford Expedition Transmission Fluid

Ford Expedition Transmission Fluid Equivalent

ByPeter M. Thomas

The Ford Expedition is a full-size SUV that has been on the market since 1997. It is known for its spacious interior, powerful engine options, and impressive towing and hauling capabilities. However, like all vehicles, the Expedition requires regular maintenance in order to keep it running smoothly. One of the most important maintenance tasks is changing the transmission fluid.

Why is Transmission Fluid Important?

Transmission fluid is a lubricant that helps to keep the transmission components moving smoothly. It also helps to cool the transmission and prevent wear and tear. When the transmission fluid is dirty or old, it can cause the transmission to shift hard, slip, or even fail. Therefore, it is important to change the transmission fluid on a regular basis in order to keep the Expedition’s transmission running properly.

How Often Should I Change the Transmission Fluid?

The recommended transmission fluid change interval for the Ford Expedition is 60,000 miles or 6 years, whichever comes first. However, this interval may need to be shortened if the vehicle is used in severe driving conditions, such as towing or off-roading.

What Type of Transmission Fluid Should I Use?

The type of transmission fluid that you should use in your Expedition depends on the year of the vehicle and the type of transmission that it has. For Expeditions manufactured before 2006, Ford recommends using Mercon V transmission fluid. For Expeditions manufactured after 2006, Ford recommends using Mercon LV transmission fluid.

Ford Expedition Transmission Fluid Equivalent

For the Ford Expedition, it is recommended to use Mercon V automatic transmission fluid for models before 2009. For 2009 and newer models, Ford recommends using Mercon LV (Low Viscosity) automatic transmission fluid. Always refer to your owner’s manual or consult with a professional mechanic to ensure you are using the correct fluid for your specific model and year.

How to Change the Transmission Fluid

Changing the transmission fluid in a Ford Expedition is a relatively simple task that can be completed in about an hour. However, it is important to follow the manufacturer’s recommendations and use the correct type of transmission fluid. Here are the steps involved in changing the transmission fluid:

  1. Gather the necessary materials:
    • New transmission fluid (4 quarts)
    • Transmission filter
    • Transmission pan gasket
    • Drain pan
    • Funnel
    • Wrench
    • Socket set
    • Rags
  2. Prepare the vehicle:
    • Park the vehicle on a level surface.
    • Turn off the engine and allow it to cool down.
    • Place the vehicle in park.
    • Engage the parking brake.
  3. Locate the transmission drain plug:
    • The transmission drain plug is typically located on the bottom of the transmission pan.
    • It is usually a 17mm bolt.
  4. Place the drain pan under the transmission drain plug:
    • Make sure that the drain pan is large enough to catch all of the transmission fluid.
  5. Loosen the transmission drain plug:
    • Use the wrench to loosen the transmission drain plug.
    • Be careful not to drop the bolt into the drain pan.
  6. Allow the transmission fluid to drain:
    • Allow all of the transmission fluid to drain out of the transmission.
    • This may take several minutes.
  7. Replace the transmission drain plug:
    • Once all of the transmission fluid has drained out, replace the transmission drain plug.
    • Tighten the drain plug until it is snug.
  8. Locate the transmission filter:
    • The transmission filter is typically located on the side of the transmission pan.
    • It is usually held in place by a few bolts.
  9. Remove the transmission filter:
    • Use the wrench to remove the bolts that hold the transmission filter in place.
    • Be careful not to spill any transmission fluid.
  10. Install the new transmission filter:
    • Insert the new transmission filter into the transmission.
    • Tighten the bolts that hold the transmission filter in place.
  11. Install the new transmission pan gasket:
    • Place the new transmission pan gasket on the transmission pan.
    • Make sure that the gasket is properly seated.
  12. Reinstall the transmission pan:
    • Place the transmission pan back on the transmission.
    • Tighten the bolts that hold the transmission pan in place.
  13. Add new transmission fluid:
    • Use the funnel to add new transmission fluid to the transmission.
    • Add the amount of transmission fluid that is specified in the owner’s manual.
  14. Check the transmission fluid level:
    • Start the engine and allow it to warm up.
    • Shift the transmission through all of the gears.
    • Check the transmission fluid level using the dipstick.
    • The transmission fluid level should be between the “Full” and “Add” marks on the dipstick.
  15. Test drive the vehicle:
    • Take the vehicle for a test drive.
    • Make sure that the transmission shifts smoothly and that there are no leaks.

Conclusion

Changing the transmission fluid in a Ford Expedition is a relatively simple task that can be completed in about an hour. However, it is important to follow the manufacturer’s recommendations and use the correct type of transmission fluid. By following the steps outlined in this guide, you can help to keep your Expedition’s transmission running smoothly for many years to come.

Peter M. Thomas
Latest posts by Peter M. Thomas (see all)

Similar Posts