Gmc Terrain Oil Capacity

Gmc Terrain Oil Capacity

ByPeter M. Thomas

GMC Terrain Oil Capacity: Everything You Need to Know

The GMC Terrain is a compact SUV that has been in production since 2009.
It is available with a variety of engines, including a 2.4-liter four-cylinder, a 3.6-liter V6, and a 2.0-liter turbocharged four-cylinder.
The oil capacity for the GMC Terrain varies depending on the engine type.

2.4-Liter Four-Cylinder Engine

The 2.4-liter four-cylinder engine in the GMC Terrain has an oil capacity of 5.3 quarts.
This includes the oil filter.
When changing the oil, it is important to use the correct type of oil.
The recommended oil type for the 2.4-liter four-cylinder engine is 5W-30.

3.6-Liter V6 Engine

The 3.6-liter V6 engine in the GMC Terrain has an oil capacity of 6.0 quarts.
This includes the oil filter.
When changing the oil, it is important to use the correct type of oil.
The recommended oil type for the 3.6-liter V6 engine is 5W-30.

2.0-Liter Turbocharged Four-Cylinder Engine

The 2.0-liter turbocharged four-cylinder engine in the GMC Terrain has an oil capacity of 5.5 quarts.
This includes the oil filter.
When changing the oil, it is important to use the correct type of oil.
The recommended oil type for the 2.0-liter turbocharged four-cylinder engine is 5W-30.

How to Check the Oil Level in Your GMC Terrain

Checking the oil level in your GMC Terrain is a simple process that can be done in just a few minutes.
Here are the steps:

  1. Park your GMC Terrain on a level surface.
  2. Turn off the engine and wait a few minutes for the oil to settle.
  3. Open the hood and locate the oil dipstick.
  4. Pull the dipstick out and wipe it clean with a rag.
  5. Reinsert the dipstick into the tube and push it down until it stops.
  6. Pull the dipstick out again and check the oil level.

The oil level should be between the “Full” and “Add” marks on the dipstick.
If the oil level is low, you will need to add oil.
Be sure to use the correct type of oil for your engine.

How to Change the Oil in Your GMC Terrain

Changing the oil in your GMC Terrain is a relatively simple process that can be done in about an hour.
Here are the steps:

  1. Park your GMC Terrain on a level surface.
  2. Turn off the engine and wait a few minutes for the oil to settle.
  3. Open the hood and locate the oil drain plug.
  4. Place a drain pan under the oil drain plug.
  5. Loosen the oil drain plug and allow the oil to drain completely.
  6. Replace the oil drain plug.
  7. Locate the oil filter.
  8. Remove the oil filter.
  9. Apply a thin coat of new oil to the gasket of the new oil filter.
  10. Screw on the new oil filter until it is snug.
  11. Add new oil to the engine.
    The amount of oil you need to add will depend on the engine type.
  12. Check the oil level with the dipstick.
  13. Start the engine and let it run for a few minutes.
  14. Turn off the engine and check for leaks.

If you are not comfortable changing the oil in your GMC Terrain yourself, you can take it to a qualified mechanic.

Peter M. Thomas
Latest posts by Peter M. Thomas (see all)

Similar Posts