Honda S2000 Engine Oil Capacity

Honda S2000 Engine Oil Capacity

ByPeter M. Thomas

The Honda S2000 is a popular sports car that was produced from 1999 to 2009. It is known for its high-revving engine and agile handling. If you own an S2000, it is important to understand the engine oil capacity and how to change the oil regularly. In this blog post, we will provide a detailed guide to the Honda S2000 engine oil capacity and how to change the oil.

Engine Oil Capacity

The Honda S2000 engine oil capacity is 3.7 quarts (3.5 liters). This includes the oil filter capacity, which is 0.2 quarts (0.2 liters). When changing the oil, it is important to add the correct amount of oil. Too much oil can cause engine damage, while too little oil can lead to premature wear and tear.

Oil Change Intervals

The recommended oil change interval for the Honda S2000 is every 5,000 miles or 6 months, whichever comes first. However, you may need to change the oil more often if you drive in severe conditions, such as stop-and-go traffic or dusty environments. You can also check the oil level regularly and add oil as needed.

Oil Type

The best oil type for the Honda S2000 is a high-quality synthetic 5W-20 oil. This oil is designed to provide excellent protection for the engine and help to improve fuel economy.

How to Change the Oil

  1. Gather your materials. You will need the following:
    • 3.7 quarts (3.5 liters) of high-quality synthetic 5W-20 oil
    • New oil filter (Honda part number 15400-PCX-004)
    • Oil drain pan
    • Funnel
    • Wrench
    • Safety glasses
    • Gloves
  2. Park your car on a level surface. Turn off the engine and allow it to cool down.
  3. Crawl under the car and locate the oil drain plug. It is located on the bottom of the oil pan, near the front of the engine.
  4. Place the oil drain pan under the oil drain plug.
  5. Use the wrench to loosen the oil drain plug. Be careful not to drop the bolt into the oil pan.
  6. Allow all of the oil to drain out of the engine. This may take a few minutes.
  7. Replace the oil drain plug. Tighten the plug until it is snug.
  8. Locate the oil filter. It is located on the top of the engine, near the back of the engine bay.
  9. Use the wrench to loosen the oil filter. Be careful not to spill any oil.
  10. Remove the old oil filter.
  11. Apply a thin coat of new oil to the gasket of the new oil filter.
  12. Screw on the new oil filter until it is hand-tight.
  13. Add 3.7 quarts (3.5 liters) of new oil to the engine. Use the funnel to help you add the oil.
  14. Check the oil level using the dipstick. The oil level should be between the “Full” and “Add” marks on the dipstick.
  15. Start the engine and let it run for a few minutes. Then, turn off the engine and check for leaks.

Conclusion

Changing the oil in your Honda S2000 is a relatively simple task that can be completed in about 30 minutes. By following the steps in this guide, you can ensure that your S2000 has the proper amount of oil and that the oil is clean and fresh. This will help to keep your engine running smoothly and efficiently.

Peter M. Thomas
Latest posts by Peter M. Thomas (see all)

Similar Posts