Hyundai Kona Transmission Fluid Capacity

by

Transmission fluid is a type of lubricant that is used in automatic transmissions. It helps to keep the transmission components lubricated and cool, and it also helps to prevent wear and tear.

Hyundai Kona Transmission Fluid Capacity

The transmission fluid capacity for a Hyundai Kona can vary depending on the model year and whether it has a manual transmission, automatic transmission, or a dual-clutch transmission (DCT). Here are some general guidelines for different transmissions:

Hyundai Kona (Manual Transmission)

  • 2018 and newer:
    • Total Capacity: Approximately 1.9 quarts (1.8 liters)

Hyundai Kona (Automatic Transmission)

  • 2018 and newer:
    • Drain and Refill: Approximately 4.2 quarts (4.0 liters)
    • Total Capacity: Approximately 7.7 quarts (7.3 liters)

Hyundai Kona (Dual-Clutch Transmission – DCT)

  • 2018 and newer:
    • Drain and Refill: Approximately 2.1 quarts (2.0 liters)
    • Total Capacity: Approximately 7.0 quarts (6.6 liters)

For the most accurate information, it’s best to consult your vehicle’s owner manual or contact a Hyundai dealership. They can provide the exact specifications for your specific model and transmission type.

Why is Transmission Fluid Important?

Transmission fluid is important because it helps to keep the transmission running smoothly and efficiently. Without transmission fluid, the transmission components would quickly wear out and the transmission would fail.

When Should I Change My Transmission Fluid?

The frequency with which you need to change your transmission fluid depends on your driving habits and the type of transmission fluid that you are using. However, most manufacturers recommend changing the transmission fluid every 30,000 to 60,000 miles.

What Type of Transmission Fluid Do I Need?

The type of transmission fluid that you need depends on the make and model of your vehicle. You can find the recommended transmission fluid type in your vehicle’s owner’s manual.

How to Change Transmission Fluid

Changing transmission fluid is a relatively simple process that can be done at home with a few basic tools. However, it is important to follow the manufacturer’s instructions carefully to avoid damaging the transmission.

Here are the steps involved in changing transmission fluid:

1. Gather the following materials:
* New transmission fluid (the correct type for your vehicle)
* A funnel
* A wrench
* A pan
* Rags

2. Park your vehicle on a level surface and turn off the engine.

3. Locate the transmission fluid drain plug.

4. Place the pan under the drain plug.

5. Loosen the drain plug and allow the transmission fluid to drain out.

6. Once the transmission fluid has stopped draining, tighten the drain plug.

7. Locate the transmission fluid fill plug.

8. Insert the funnel into the fill plug.

9. Add new transmission fluid until the fluid level reaches the “full” mark on the dipstick.

10. Replace the fill plug.

11. Start the engine and let it run for a few minutes.

12. Check the transmission fluid level again and adjust it if necessary.

Conclusion

Transmission fluid is an important part of your vehicle’s transmission. By changing the transmission fluid regularly, you can help to keep your transmission running smoothly and efficiently for many years to come.

Peter M. Thomas
Latest posts by Peter M. Thomas (see all)

Content Section

→ Section