The Hyundai Palisade is a three-row SUV that offers ample space and comfort for up to eight passengers. It is powered by a 3.8L V6 engine that is mated to an eight-speed automatic transmission. The transmission fluid in the Hyundai Palisade is responsible for lubricating the gears and bearings in the transmission, as well as providing hydraulic pressure for shifting gears.
The transmission fluid capacity for a Hyundai Palisade can vary depending on the model year and the specific type of transmission. Here is the information for recent model years:
Hyundai Palisade (8-speed automatic transmission)
- 2019-2021 Models:
- Drain and Refill: Approximately 5.3 quarts (5.0 liters)
- Total Capacity: Approximately 10.1 quarts (9.5 liters)
These figures are approximate and can vary based on specific models and configurations. For the most accurate information, it’s always best to consult the owner’s manual for your specific model year or contact a Hyundai dealership.
How Much Transmission Fluid Does a Hyundai Palisade Take?
The Hyundai Palisade has a transmission fluid capacity of 9.1 quarts. This includes the fluid that is in the transmission pan, as well as the fluid that is in the torque converter.
What Type of Transmission Fluid Does a Hyundai Palisade Take?
The Hyundai Palisade uses SP-IV transmission fluid. This is a low-viscosity fluid that is designed to improve fuel economy and reduce wear and tear on the transmission. It is also compatible with previous generations of Hyundai vehicles that use SP-III transmission fluid.
When Should I Change the Transmission Fluid in My Hyundai Palisade?
Hyundai recommends that the transmission fluid in the Palisade be changed every 30,000 miles or 2 years, whichever comes first. However, if you drive your Palisade in severe conditions, such as stop-and-go traffic or towing heavy loads, you may need to change the transmission fluid more often.
How Do I Change the Transmission Fluid in My Hyundai Palisade?
Changing the transmission fluid in the Hyundai Palisade is a relatively simple process that can be done at home with a few basic tools. Here are the steps involved:
1. Gather the following tools and materials:
* New transmission fluid (9.1 quarts)
* Transmission fluid drain pan
* Funnel
* Rags
* Wrench
2. Park your Palisade on a level surface and turn off the engine.
3. Crawl under the vehicle and locate the transmission pan. It is typically located at the bottom of the transmission, near the front of the vehicle.
4. Place the transmission fluid drain pan under the transmission pan.
5. Loosen the drain plug on the transmission pan with the wrench.
6. Allow all of the transmission fluid to drain out into the drain pan.
7. Once all of the transmission fluid has drained out, replace the drain plug.
8. Remove the fill plug on the transmission pan.
9. Insert the funnel into the fill hole and add new transmission fluid until it reaches the “Full” mark on the dipstick.
10. Replace the fill plug.
11. Start the engine and let it run for a few minutes.
12. Check the transmission fluid level again and add more fluid if necessary.
Benefits of Changing the Transmission Fluid in Your Hyundai Palisade
Changing the transmission fluid in your Hyundai Palisade has several benefits, including:
* Improved fuel economy
* Reduced wear and tear on the transmission
* Smoother shifting
* Longer transmission life
Conclusion
Changing the transmission fluid in your Hyundai Palisade is a relatively simple and inexpensive maintenance task that can help to extend the life of your transmission and improve its performance. If you have any questions about changing the transmission fluid in your Palisade, please consult your owner’s manual or a qualified mechanic.
- Best 10W30 Oil for 5th Gen Cummins Diesel Engines - 11 February 2025
- Best Oil and Fuel Filters for Duramax Engines - 11 February 2025
- Best Oil Additives to Improve Fuel Economy - 11 February 2025