Hyundai Santa Fe Engine Oil Capacity Usa

Hyundai Santa Fe Engine Oil Capacity Usa

ByPeter M. Thomas

The Hyundai Santa Fe is a popular SUV that is known for its reliability and performance. One of the most important things you can do to keep your Santa Fe running smoothly is to change the engine oil regularly. The engine oil capacity for the Hyundai Santa Fe varies depending on the year and model of the vehicle. However, most Santa Fe models have an engine oil capacity of between 5 and 6 quarts.

Hyundai Santa Fe Engine Oil Capacity Usa

The engine oil capacity of a Hyundai Santa Fe in the USA varies depending on the model year and engine type. Here are some general guidelines:

Hyundai Santa Fe (2.4L 4-cylinder engine)

  • 2013-2018: Approximately 5.1 quarts (4.8 liters) with a filter change.
  • 2019-2020: Approximately 5.1 quarts (4.8 liters) with a filter change.
  • 2021 and newer: Approximately 5.1 quarts (4.8 liters) with a filter change.

Hyundai Santa Fe (2.0L Turbo 4-cylinder engine)

  • 2013-2018: Approximately 5.1 quarts (4.8 liters) with a filter change.
  • 2019-2020: Approximately 5.1 quarts (4.8 liters) with a filter change.
  • 2021 and newer: Approximately 5.1 quarts (4.8 liters) with a filter change.

Hyundai Santa Fe (2.5L 4-cylinder engine)

  • 2021 and newer: Approximately 5.9 quarts (5.6 liters) with a filter change.

Hyundai Santa Fe (3.3L V6 engine)

  • 2013-2018: Approximately 6.9 quarts (6.5 liters) with a filter change.

For the most accurate information, it is always best to consult your vehicle’s owner manual or contact a Hyundai dealership. They can provide the exact specifications for your specific model and engine type.

How to Check the Engine Oil Level

To check the engine oil level in your Hyundai Santa Fe, follow these steps:

  1. Park your vehicle on a level surface.
  2. Turn off the engine and allow it to cool down.
  3. Open the hood of your vehicle.
  4. Locate the engine oil dipstick. The dipstick is usually located near the front of the engine, on the driver’s side.
  5. Pull the dipstick out of the engine and wipe it clean with a rag.
  6. Reinsert the dipstick into the engine until it is fully seated.
  7. Pull the dipstick out of the engine again and check the oil level.

The oil level should be between the “Full” and “Add” marks on the dipstick. If the oil level is low, you will need to add more oil to the engine.

How to Change the Engine Oil

To change the engine oil in your Hyundai Santa Fe, follow these steps:

  1. Park your vehicle on a level surface.
  2. Turn off the engine and allow it to cool down.
  3. Open the hood of your vehicle.
  4. Locate the engine oil drain plug. The drain plug is usually located on the bottom of the oil pan, on the passenger’s side.
  5. Place a drain pan under the oil drain plug.
  6. Loosen the oil drain plug with a wrench.
  7. Allow all of the oil to drain out of the engine.
  8. Once all of the oil has drained out, replace the oil drain plug.
  9. Locate the engine oil filter. The oil filter is usually located near the top of the engine, on the driver’s side.
  10. Unscrew the oil filter with an oil filter wrench.
  11. Apply a thin coat of new oil to the gasket of the new oil filter.
  12. Screw the new oil filter onto the engine until it is snug.
  13. Add new engine oil to the engine. The amount of oil you need to add will depend on the year and model of your vehicle. However, most Santa Fe models have an engine oil capacity of between 5 and 6 quarts.
  14. Check the engine oil level to make sure it is between the “Full” and “Add” marks on the dipstick.
  15. Close the hood of your vehicle.

Conclusion

Changing the engine oil in your Hyundai Santa Fe is a relatively easy task that can be completed in about 30 minutes. By following the steps above, you can keep your Santa Fe running smoothly for years to come.

 

Peter M. Thomas
Latest posts by Peter M. Thomas (see all)

Similar Posts