The Infiniti Q60 is a luxury sports coupe that offers exhilarating performance and a refined driving experience. To keep your Q60 running smoothly, it’s essential to maintain the transmission fluid at the proper level and condition. This guide will provide you with all the information you need to know about Infiniti Q60 transmission fluid, including the recommended type, how to check the level, and when to change it.
Infiniti Q60 Transmission Fluid Capacity
The transmission fluid capacity for an Infiniti Q60 can vary depending on the model year and transmission type. Here are some general guidelines:
1st Generation (2014-2016) – Infiniti Q60 (formerly G37 Coupe)
- 7-speed Automatic Transmission: Approximately 10.4 quarts (total system capacity)
2nd Generation (2017-present)
- 7-speed Automatic Transmission: Approximately 10.4 quarts (total system capacity)
For precise information, always refer to the owner’s manual or consult with an Infiniti dealer or certified mechanic, as there can be slight variations based on the specific model and year.
Types of Infiniti Q60 Transmission Fluid
The Infiniti Q60 uses a specific type of transmission fluid known as Nissan Matic Fluid D. This fluid is designed to meet the unique requirements of the Q60’s transmission and provide optimal performance and protection. Using the incorrect type of fluid can lead to transmission damage and costly repairs.
Checking the Infiniti Q60 Transmission Fluid Level
Checking the transmission fluid level is a simple process that can be done at home. Here are the steps involved:
- Park your Infiniti Q60 on a level surface and turn off the engine.
- Open the hood and locate the transmission fluid dipstick. It is typically located near the back of the engine compartment, near the firewall.
- Pull out the dipstick and wipe it clean with a rag.
- Reinsert the dipstick fully into the transmission.
- Pull out the dipstick again and check the fluid level. The fluid should be between the “Full” and “Add” marks on the dipstick.
- If the fluid level is low, add Nissan Matic Fluid D until it reaches the “Full” mark.
Changing the Infiniti Q60 Transmission Fluid
The Infiniti Q60 transmission fluid should be changed every 60,000 miles or 6 years, whichever comes first. However, more frequent changes may be necessary if you drive in severe conditions, such as stop-and-go traffic or high temperatures.
Changing the transmission fluid is a more complex process than checking the level, and it is best left to a qualified mechanic. Here are the general steps involved:
- Park your Infiniti Q60 on a level surface and turn off the engine.
- Raise the vehicle on a lift or jack stands.
- Locate the transmission fluid drain plug. It is typically located on the bottom of the transmission pan.
- Place a drain pan under the drain plug and open the plug. Allow the old fluid to drain completely.
- Replace the drain plug and tighten it securely.
- Locate the transmission fluid fill plug. It is typically located on the side of the transmission pan.
- Add new Nissan Matic Fluid D to the transmission until it reaches the “Full” mark on the dipstick.
- Lower the vehicle and start the engine.
- Shift through all the gears and check for any leaks.
Conclusion
Maintaining the transmission fluid in your Infiniti Q60 is essential for ensuring optimal performance and longevity. By following the guidelines provided in this guide, you can keep your Q60’s transmission running smoothly for many years to come.
- Best 10W30 Oil for 5th Gen Cummins Diesel Engines - 11 February 2025
- Best Oil and Fuel Filters for Duramax Engines - 11 February 2025
- Best Oil Additives to Improve Fuel Economy - 11 February 2025