The Jaguar Xe is a compact executive car produced by Jaguar Land Rover. It was launched in 2014 and is available in sedan and wagon body styles. The Xe is powered by a range of four-cylinder and six-cylinder petrol and diesel engines.
The transmission fluid capacity of the Jaguar Xe varies depending on the model and year. However, most models have a transmission fluid capacity of between 6 and 8 quarts.
The transmission fluid capacity for a Honda Odyssey varies depending on the model year and whether it has an automatic transmission (AT) or a continuously variable transmission (CVT). Here are the guidelines for different models:
Jaguar Xe Transmission Fluid Capacity (Automatic Transmission)
- 2005-2010 Models:
- Drain and Refill: Approximately 3.3 quarts (3.1 liters)
- Total Capacity: Approximately 8.5 quarts (8.0 liters)
- 2011-2017 Models:
- Drain and Refill: Approximately 3.3 quarts (3.1 liters)
- Total Capacity: Approximately 8.5 quarts (8.0 liters)
- 2018 and newer Models:
- Drain and Refill: Approximately 3.7 quarts (3.5 liters)
- Total Capacity: Approximately 9.0 quarts (8.5 liters)
These figures are approximate and can vary based on specific models and configurations. For the most accurate information, it’s always best to consult the owner’s manual for your specific model year or contact a Honda dealership. They can provide the exact specifications for your specific model and transmission type.
How to Check the Transmission Fluid Level
To check the transmission fluid level, you will need to:
- Park your Jaguar Xe on a level surface.
- Turn off the engine and allow it to cool down.
- Open the hood and locate the transmission fluid dipstick.
- Pull the dipstick out and wipe it clean with a rag.
- Reinsert the dipstick into the transmission fluid tube until it is fully seated.
- Pull the dipstick out again and check the fluid level.
The transmission fluid level should be between the “Full” and “Add” marks on the dipstick.
How to Add Transmission Fluid
If the transmission fluid level is low, you will need to add some fluid. To do this, you will need:
- Purchase the correct type of transmission fluid for your Jaguar Xe.
- Park your Jaguar Xe on a level surface.
- Turn off the engine and allow it to cool down.
- Open the hood and locate the transmission fluid dipstick tube.
- Unscrew the cap on the transmission fluid dipstick tube.
- Use a funnel to add transmission fluid to the tube until the fluid level reaches the “Full” mark on the dipstick.
- Screw the cap back on the transmission fluid dipstick tube.
It is important to use the correct type of transmission fluid for your Jaguar Xe. Using the wrong type of fluid can damage the transmission.
When to Change the Transmission Fluid
The transmission fluid in your Jaguar Xe should be changed every 60,000 miles or 6 years, whichever comes first. However, you may need to change the fluid more often if you drive in severe conditions, such as stop-and-go traffic or off-road conditions.
Changing the transmission fluid is a relatively simple process that can be done at home with a few basic tools. However, it is important to follow the manufacturer’s instructions carefully to avoid damaging the transmission.
Conclusion
The transmission fluid capacity of the Jaguar Xe varies depending on the model and year. However, most models have a transmission fluid capacity of between 6 and 8 quarts. It is important to check the transmission fluid level regularly and add fluid as needed. The transmission fluid should also be changed every 60,000 miles or 6 years, whichever comes first.
- Best 10W30 Oil for 5th Gen Cummins Diesel Engines - 11 February 2025
- Best Oil and Fuel Filters for Duramax Engines - 11 February 2025
- Best Oil Additives to Improve Fuel Economy - 11 February 2025