Nissan Rogue Transmission Fluid Capacity

Nissan Rogue Transmission Fluid Capacity

ByPeter M. Thomas

The Nissan Rogue is a popular SUV that has been on the market since 2008. It is known for its reliability and fuel efficiency, and it is a great choice for families and commuters alike. One of the most important maintenance tasks for any vehicle is to change the transmission fluid, and the Nissan Rogue is no exception.

How often should I change my Nissan Rogue’s transmission fluid?

Nissan recommends changing the transmission fluid in the Rogue every 30,000 miles. However, if you drive in severe conditions, such as in stop-and-go traffic or in extreme heat or cold, you may need to change the fluid more often.

What type of transmission fluid does my Nissan Rogue use?

The Nissan Rogue uses Nissan CVT Fluid NS-2. This is a special type of transmission fluid that is designed for use in Nissan vehicles with continuously variable transmissions (CVTs).

How much transmission fluid does my Nissan Rogue need?

The amount of transmission fluid your Nissan Rogue needs can vary slightly depending on the specific model year and if you’re doing a simple drain-and-fill or a more comprehensive flush. Here’s a breakdown to keep things simple:

Simple Drain-and-Fill:

  • Most Nissan Rogues will need approximately 5.2 quarts of transmission fluid for a drain-and-fill.

Important: Draining the old fluid doesn’t remove all the fluid from the system. This is why a drain-and-fill may require slightly less fluid than the total capacity of your transmission.

Comprehensive Flush:

  • Consult your Nissan Rogue’s owner’s manual or a trusted mechanic for the exact transmission fluid capacity if you’re performing a full flush. This process aims to replace more of the old fluid and will often require more than a simple drain-and-fill.

Table for Clarity

ProcedureApprox. Fluid Needed
Drain-and-Fill5.2 quarts
Comprehensive FlushConsult owner’s manual or mechanic

Remember: Always double-check the information in your Nissan Rogue’s owner’s manual, as there might be slight variations between models.

How do I change the transmission fluid in my Nissan Rogue?

Changing the transmission fluid in a Nissan Rogue is a relatively simple process. Here are the steps:

  1. Park your Rogue on a level surface and engage the parking brake.
  2. Locate the transmission fluid drain plug. It is located on the bottom of the transmission pan.
  3. Place a drain pan under the drain plug and loosen the plug with a wrench.
  4. Allow the transmission fluid to drain into the pan.
  5. Once the fluid has drained, tighten the drain plug.
  6. Locate the transmission fluid fill plug. It is located on the side of the transmission.
  7. Remove the fill plug and insert a funnel into the hole.
  8. Add the new transmission fluid to the funnel until it reaches the full mark on the dipstick.
  9. Replace the fill plug and tighten it.
  10. Start your Rogue and let it run for a few minutes.
  11. Check the transmission fluid level again and add more fluid if necessary.

Conclusion

Changing the transmission fluid in your Nissan Rogue is an important maintenance task that will help keep your vehicle running smoothly. By following these steps, you can easily change the fluid yourself and save money on maintenance costs.

Peter M. Thomas
Latest posts by Peter M. Thomas (see all)

Similar Posts